Pressure switch for domestic water pumps fountain pumps SK 2 230V single phase

Item no.: 50763

GTIN/EAN: 4250390844548

Quantity	Unit price
To 1	€7.49*
From 2	€6.97*

Prices incl. VAT plus shipping costs

More than 30 available.

Immediately available, 2 - 3 days delivery time within Germany.
Delivery times for other countries see here.

Shipping weight: 0,38 kg
• Single-phase / 220–240 V / 8A
• Start pressure setting range 1.4–2.8 bar
• Pressure setting range 1.4–4.1 bar
• Operating pressure max. 6 bar
• For domestic water pumps, garden pumps, compressors

Product information "Pressure switch for domestic water pumps fountain pumps SK 2 230V single phase"

You will get a mechanical pressure switch for use in domestic water pumps and garden pumps.

Alternating water current pressure switch for water pumps, especially for those with pressure tank, or garden pumps.

The start/cut-in pressure and stop/cut-off pressure are infinitely adjustable. A single-phase switch provides one adjustment for both the phase and a neutral. Depending on the water pressure, the switch turns the pump on and off automatically. If the pressure in the water circulation reaches the cut-in pressure value, the pump turns on. The pump stops working if the pressure reaches the cut-off value (pressure controller).

In case your pump has a power more than 1.1 kW, you should install a standard power contractor or an appropriate power relay. The 380-V power contractors are also suitable for the 380/400-V three-phase pumps.

Safety Instructions

Safety Information

Please read and follow the operating instructions and safety information prior to initial operation.
The device is not intended for use by persons (including children) with reduced physical, sensory and mental abilities or lack of experience and/or knowledge, unless they are supervised or have been given instructions concerning the correct use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the device.
Appropriate Use
Only use pressure switches for approved applications and the specified pressure ranges. Not suitable for aggressive or explosive media.
Observe Maximum Pressure Limits
Never exceed the specified maximum operating pressure limits to avoid damage and danger.
Install a suitable pressure relief device for systems with high pressure.
Risk of Electric Shock
Never lift, transport or attach the appliance by the power cable.
Ensure that electrical connections and cables are properly sealed and watertight to prevent short circuits.
If the cable or the plug is damaged due to external influences, the cable must not be repaired. It has to be replaced with a new one.
Do not exceed the maximum permissible current and voltage load of the pressure switch.

Manufacturer

WilTec Wildanger Technik GmbH
Wilhelm-Lexis-Str. 8
52249 Eschweiler
DE
service@wiltec.info

Properties "Pressure switch for domestic water pumps fountain pumps SK 2 230V single phase"

Battery required:	No
Colour:	black
Dimensions:	98 x 70 x 98 mm
Druck:	Druckeinstellbereich 1,4–4,1 bar Einstellbereich Startdruck 1,4–2,8 bar max. Betriebsdruck 6 bar
Mains voltage/frequency (V~/Hz):	220–240 V / 50 Hz
Max. nominal current:	8 A
Max. temperature:	60 °C
Min. temperature:	0 °C
Product type:	pressure switch

Ersatzteile

5m 250V 16A Float Switch submersible water pump level controller

Available

Item no.: 50629

• Float Switch 250V 50/60Hz max. 16A
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 5 m

From €10.65 *

Subscription