H-Tronic PLS 1000 Humidity Regulator Heat-recovery Ventilation Hygrometry Dew Point Control
• Wall casing size: 17 x 14 x 6,8 cm
• Sensor casing size: 6.7 x 3.7 x 2.2 cm
• 5 different modes
• Remote measurement up to 50 m possible
• 4 potential-free relays
Since this device is suitable for both wall and DIN rail mounting, it is easy to attach and can be used flexibly. The PLS 1000 can measure the current relative humidity as well as the current temperature in two environments with the help of two sensors included in the scope of delivery. The device then determines the absolute air humidity as well as the respective dew points from these values. Based on these values, 5 different modes can be used to implement different humidity and temperature regulations.
Room fans for supply and return air can be controlled and operated directly via 4 integrated potential-free relays. Apart from the measurement of humidity and temperature, this system also enables automatic ventilation, drying or humidification of rooms as well as the implementation of a temperature and humidity switch on 2 channels.
The 5 different modes include the following functions:
- Temperature and humidity measurement
- Room and basement drying
- DT ventilation (This mode is used to ventilate rooms by supplying fresh air). Ventilation takes place when the temperature of the outside air is lower than that of the inside air.)
- Temperature and humidity switch
- Manual temperature adjustment
Empfehlung: Druckschalter
No longer available
• Sensor casing size: 6.7 x 3.7 x 2.2 cm
• 5 different modes
• Remote measurement up to 50 m possible
• 4 potential-free relays
Available
• Starting pressure 1.5 bar
• Operating pressure max. 10 bar
• For domestic water pumps, pumps, compressors
Available
• Starting pressure setting range 1.5 to 3 bar
• Pressure setting range 1.5 to 3 bar
• Operating pressure max. 10 bar
• For domestic water pumps, pumps, compressors
Available
• Starting pressure 1.5 bar
• Operating pressure max. 10 bar
• For domestic water pumps, garden pumps, compressors
Available
• Starting pressure 1.5 bar
• Operating pressure max. 10 bar
• For domestic water pumps, pumps, compressors
Available
• Start pressure setting range 1.4–2.8 bar
• Pressure setting range 1.4–4.1 bar
• Operating pressure max. 6 bar
• For domestic water pumps, garden pumps, compressors
Available
• Start pressure setting range 1.4–2.8 bar
• Pressure setting range 1.4–4.1 bar
• Operating pressure max. 6 bar
• For domestic water pumps, garden pumps, compressors
No longer available
• Start pressure setting range 5.5 to 8 bar
• Pressure setting range 5.5 to 12.5 bar
• Operating pressure max. 12,5 bar
• For domestic water pumps, garden pumps, compressors
Available
• Start pressure setting range 1.4–2.8 bar
• Pressure setting range 1.4–4.1 bar
• Operating pressure max. 6 bar
• For domestic water pumps, garden pumps, compressors
Available
• Starting pressure 1.5 bar & operating pressure max. 10 bar
• Including 2 cables (protective contact coupling/plug)
• With dry-run protection
• Keeps the water pressure at a constant level