Pressure switch for domestic pumps fountain pumps SKD 2D 230V single phase cable included
| Quantity | Unit price |
|---|---|
| To 1 |
€36.49*
|
| From 2 |
€34.59*
|
More than 30 available.
Immediately available, 2 - 3 days delivery time within Germany.
Delivery times for other countries see here.
• Single-phase / 220–240 V / 10 A
• Starting pressure setting range 1.5 to 3 bar
• Pressure setting range 1.5 to 3 bar
• Operating pressure max. 10 bar
• For domestic water pumps, pumps, compressors
The pressure switch reduces the effects of water hammer.
The pump controller consists of hydraulic and electronic parts:
The hydraulic part:
• Stop valve
• Valve sensitive to flow change
• Form-pressed and enhanced plastic body
• Membrane and spring sensitive to pressure change
• Check valve that prevents water leaks when the membrane is damaged
The electronic part:
• a robust casing from self-extinguishing and form-pressed plastic
• a single tested and controlled electronic card with insulated conducting path.
• a relay with a switching capacity of approx. 100.000 cycles during continuous operation with a maximum charge of 1.1 kW.
• a varistor (additional protective element) against voltage spikes and surges.
The pressure switch goes together with 2 cables (protective contact coupling/plug), each 1.35 m long.
| Abmessungen: | 149 x 123 x 225 mm |
|---|---|
| Anschlussgewinde: | 32.89 Millimeter |
| Anschlüsse: | 32,89–33,25 mm (1 Zoll) AG |
| Betriebsdruck: | 1.5 Bar |
| Druck: |
Druckeinstellbereich 1,5–3,0 bar Einstellbereich Startdruck 1,5–3 bar max. Betriebsdruck 10 bar |
| Druckschalter / Pumpensteuerung: |
Für Pumpen bis 1,1 KW Nennleistung Manometer 1 - 12 bar / 1-170 psi Stromstärke max. 10 A |
| Farbe: | blau, schwarz |
| Kabellänge (m): | 1.35 Meter |
| Kabelquerschnitt (mm²): | 3 x 1,0 mm² |
| Kabeltyp: | H07RN-F3G |
| Max. temperature: | 60 °C |
| Max Nennstrom: | 10 A |
| Min. temperature: | 0 °C |
| Netzspannung/Frequenz (V~Hz): | 220–240 V / 50 Hz |
| Produktart: | Druckschalter |
| Schutzart (IP): | IP65 |
| Selbstaktivierungszeit (s/4m): | 0 |
| max. Druck (bar): | 10 Bar |
Empfehlung: Druckschalter
No longer available
• Sensor casing size: 6.7 x 3.7 x 2.2 cm
• 5 different modes
• Remote measurement up to 50 m possible
• 4 potential-free relays
Available
• Starting pressure 1.5 bar
• Operating pressure max. 10 bar
• For domestic water pumps, pumps, compressors
Available
• Starting pressure setting range 1.5 to 3 bar
• Pressure setting range 1.5 to 3 bar
• Operating pressure max. 10 bar
• For domestic water pumps, pumps, compressors
Available
• Starting pressure 1.5 bar
• Operating pressure max. 10 bar
• For domestic water pumps, garden pumps, compressors
Available
• Starting pressure 1.5 bar
• Operating pressure max. 10 bar
• For domestic water pumps, pumps, compressors
Available
• Start pressure setting range 1.4–2.8 bar
• Pressure setting range 1.4–4.1 bar
• Operating pressure max. 6 bar
• For domestic water pumps, garden pumps, compressors
Available
• Start pressure setting range 1.4–2.8 bar
• Pressure setting range 1.4–4.1 bar
• Operating pressure max. 6 bar
• For domestic water pumps, garden pumps, compressors
No longer available
• Start pressure setting range 5.5 to 8 bar
• Pressure setting range 5.5 to 12.5 bar
• Operating pressure max. 12,5 bar
• For domestic water pumps, garden pumps, compressors
Available
• Start pressure setting range 1.4–2.8 bar
• Pressure setting range 1.4–4.1 bar
• Operating pressure max. 6 bar
• For domestic water pumps, garden pumps, compressors
Available
• Starting pressure 1.5 bar & operating pressure max. 10 bar
• Including 2 cables (protective contact coupling/plug)
• With dry-run protection
• Keeps the water pressure at a constant level