Pressure switch for domestic pumps fountain pumps SKD 1 230V single phase cable included
Item no.: 51246
GTIN/EAN: 4250390882458
| Quantity | Unit price |
|---|---|
| To 1 | €30.99* |
| From 2 | €29.07* |
More than 30 available.
Immediately available, 2 - 3 days delivery time within Germany.
Delivery times for other countries see here.
• Single phase / 220–240 V / 10 A
• Starting pressure 1.5 bar
• Operating pressure max. 10 bar
• For domestic water pumps, pumps, compressors
Product information "Pressure switch for domestic pumps fountain pumps SKD 1 230V single phase cable included"
The pressure switch automatically starts and stops the water pump by the opening and closing of the valve. As a result, there is a constant pressure in the water pump. If there is no water, the dry running protection is activated, and the pump stops working.
The pressure switch reduces the effects of water hammer.
The pump controller consists of hydraulic and electronic parts:
The hydraulic part:
• Stop valve
• Valve sensitive to flow change
• Form-pressed and enhanced plastic body
• Membrane and spring sensitive to pressure change
• Check valve that prevents water leaks when the membrane is damaged
The electronic part:
• a robust casing from self-extinguishing and form-pressed plastic
• a single tested and controlled electronic card with insulated conducting path.
• a relay with a switching capacity of approx. 100.000 cycles during continuous operation with a maximum charge of 1.1 kW.
• a varistor (additional protective element) against voltage spikes and surges.
The pressure switch goes together with 2 cables (protective contact coupling/plug), each 1.35 m long.
The pressure switch reduces the effects of water hammer.
The pump controller consists of hydraulic and electronic parts:
The hydraulic part:
• Stop valve
• Valve sensitive to flow change
• Form-pressed and enhanced plastic body
• Membrane and spring sensitive to pressure change
• Check valve that prevents water leaks when the membrane is damaged
The electronic part:
• a robust casing from self-extinguishing and form-pressed plastic
• a single tested and controlled electronic card with insulated conducting path.
• a relay with a switching capacity of approx. 100.000 cycles during continuous operation with a maximum charge of 1.1 kW.
• a varistor (additional protective element) against voltage spikes and surges.
The pressure switch goes together with 2 cables (protective contact coupling/plug), each 1.35 m long.
Downloads
Manual for Pressure switch for domestic pumps fountain pumps SKD 1 230V single phase cable included Safety Instructions
Safety Information
Please read and follow the operating instructions and safety information prior to initial operation.
- The device is not intended for use by persons (including children) with reduced physical, sensory and mental abilities or lack of experience and/or knowledge, unless they are supervised or have been given instructions concerning the correct use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the device.
Appropriate Use
- Only use pressure switches for approved applications and the specified pressure ranges. Not suitable for aggressive or explosive media.
Observe Maximum Pressure Limits
- Never exceed the specified maximum operating pressure limits to avoid damage and danger.
- Install a suitable pressure relief device for systems with high pressure.
Risk of Electric Shock
- Never lift, transport or attach the appliance by the power cable.
- Ensure that electrical connections and cables are properly sealed and watertight to prevent short circuits.
- If the cable or the plug is damaged due to external influences, the cable must not be repaired. It has to be replaced with a new one.
- Do not exceed the maximum permissible current and voltage load of the pressure switch.
Manufacturer
WilTec Wildanger Technik GmbH - Wilhelm-Lexis-Str. 8
- 52249 Eschweiler
- DE
service@wiltec.info
Properties "Pressure switch for domestic pumps fountain pumps SKD 1 230V single phase cable included"
| Anschlüsse: | 32,89–33,25 mm (1 Zoll) AG |
|---|---|
| Battery required: | No |
| Colour: | blue, grey |
| Connection thread: | 32.89 Millimeter |
| Dimensions: | 169 x 220 x 167 mm |
| Druck: | max. Betriebsdruck 10 bar Startdruck 1,5 bar |
| Druckschalter / Pumpensteuerung: | Für Pumpen bis 1,1 KW Nennleistung Stromstärke max. 10 A |
| IP code: | IP65 |
| Mains voltage/frequency (V~/Hz): | 220–240 V / 50 Hz |
| Max. nominal current: | 10 A |
| Max. pressure (bar): | 10 Bar |
| Max. temperature: | 60 °C |
| Min. temperature: | 0 °C |
| Product type: | pressure switch |
| Working pressure: | 1.5 Bar |
Skip product gallery 
Empfehlung: Druckschalter
Pressure switch for domestic pumps fountain pumps SKD 2D 230V single phase cable included
• Starting pressure setting range 1.5 to 3 bar
• Pressure setting range 1.5 to 3 bar
• Operating pressure max. 10 bar
• For domestic water pumps, pumps, compressors Subscription
Available
Item no.: 51247
• Single-phase / 220–240 V / 10 A • Starting pressure setting range 1.5 to 3 bar
• Pressure setting range 1.5 to 3 bar
• Operating pressure max. 10 bar
• For domestic water pumps, pumps, compressors
From €35.28 *
Pressure switch for domestic pumps fountain pumps SKD 3 230V single phase
• Starting pressure 1.5 bar
• Operating pressure max. 10 bar
• For domestic water pumps, garden pumps, compressors Subscription
Available
Item no.: 51245
• Single-phase / 220–240 V / 10 A • Starting pressure 1.5 bar
• Operating pressure max. 10 bar
• For domestic water pumps, garden pumps, compressors
From €24.50 *
Pressure switch for domestic pumps fountain pumps SKD 3 230V single phase cable included
• Starting pressure 1.5 bar
• Operating pressure max. 10 bar
• For domestic water pumps, pumps, compressors Subscription
Available
Item no.: 51248
• Single phase / 220–240 V / 10 A • Starting pressure 1.5 bar
• Operating pressure max. 10 bar
• For domestic water pumps, pumps, compressors
From €30.59 *
Pressure switch for domestic water pumps fountain pumps SK 2 230V single phase
• Start pressure setting range 1.4–2.8 bar
• Pressure setting range 1.4–4.1 bar
• Operating pressure max. 6 bar
• For domestic water pumps, garden pumps, compressors Subscription
Available
Item no.: 50763
• Single-phase / 220–240 V / 8A• Start pressure setting range 1.4–2.8 bar
• Pressure setting range 1.4–4.1 bar
• Operating pressure max. 6 bar
• For domestic water pumps, garden pumps, compressors
From €6.97 *
Pressure switch for domestic water pumps fountain pumps SK 9 380V three phase
• Start pressure setting range 1.4–2.8 bar
• Pressure setting range 1.4–4.1 bar
• Operating pressure max. 6 bar
• For domestic water pumps, garden pumps, compressors Subscription
Available
Item no.: 50766
• 3-Phases / 380 V / 6 A• Start pressure setting range 1.4–2.8 bar
• Pressure setting range 1.4–4.1 bar
• Operating pressure max. 6 bar
• For domestic water pumps, garden pumps, compressors
From €9.42 *
Pressure Switch SKD-5 230V for Domestic Waterworks & Pumps with Dry-Run Protection 2 cables
• Starting pressure 1.5 bar & operating pressure max. 10 bar
• Including 2 cables (protective contact coupling/plug)
• With dry-run protection
• Keeps the water pressure at a constant level Subscription
Available
Item no.: 51249
• For domestic waterworks, pumps & compressors• Starting pressure 1.5 bar & operating pressure max. 10 bar
• Including 2 cables (protective contact coupling/plug)
• With dry-run protection
• Keeps the water pressure at a constant level
From €29.62 *