2m 250V 16A Float Switch submersible water pump level controller

Item no.: 50630

GTIN/EAN: 4250390800278

Quantity	Unit price
To 1	€7.99*
To 4	€7.51*
From 5	€7.12*

Prices incl. VAT plus shipping costs

More than 30 available.

Immediately available, 2 - 3 days delivery time within Germany.
Delivery times for other countries see here.

Shipping weight: 0,60 kg
• Float Switch 250V 50/60Hz max. 16A
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 2 m

Product information "2m 250V 16A Float Switch submersible water pump level controller"

The

WilTec float switch

with a 2 m long connection cable is a hollow float that functions according to the buoyancy principle.

The float switch is brought up to surface by the increasing liquid till at an angle of 50° from the horizontal a switching operation is triggered. The float switch can be dangled from above in the fluid by using a screw connection on the side or by open tanks.

By means of the standard loading weight the switching point can be optimally determined. The float switch is suitable for monitoring the fluid level for almost all fluids that do not corrode its material, independent of the degree of soiling.

You can use the float switch as full or low level indicator for controlling pumps and valves or for alarm indications. Suitable for almost all pumps

In case your pump has a higher output than 1,1 you should install a standard main contactor or a corresponding power relay. With a 380V main-contactor the 380/400V three-phase-pumps are also controllable.

Downloads

Manual for 2m 250V 16A Float Switch submersible water pump level controller

Safety Instructions

Safety Information

Please read and follow the operating instructions and safety information prior to initial operation.
The device is not intended for use by persons (including children) with reduced physical, sensory and mental abilities or lack of experience and/or knowledge, unless they are supervised or have been given instructions concerning the correct use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the device.
Appropriate Use
Use float switches only for controlling pumps and other authorised applications. It is not suitable for aggressive or explosive liquids.
Regular Maintenance
Regularly check the condition of the float switch, the cable and the connections to ensure safe operation.
Risk of Electric Shock
Never lift, transport or attach the appliance by the power cable.
Ensure that electrical connections and cables are properly sealed and watertight to prevent short circuits.
If the cable or the plug is damaged due to external influences, the cable must not be repaired. It has to be replaced with a new one.
Do not exceed the maximum permissible current and voltage load of the float switch.

Manufacturer

WilTec Wildanger Technik GmbH
Wilhelm-Lexis-Str. 8
52249 Eschweiler
DE
service@wiltec.info

Properties "2m 250V 16A Float Switch submersible water pump level controller"

Battery required:	No
Cable length (m):	2 Meter
Colour:	blue, yellow, black
Dimensions:	80 x 159 x 43 mm
Fördermedium:	Frisch- / Klar- / Brunnenwasser / Waschlauge
IP code:	IP68
Mains voltage/frequency (V~/Hz):	220–240 V / 50 Hz
Max. temperature:	50 °C
Product type:	float switch

Empfehlung: Wasserstand Schalter-Regler

10m 250V 16A Float Switch submersible water pump level controller

Available

Item no.: 50593

• Float Switch 250V 50/60Hz max. 16A
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 10 m

From €13.46 *

Subscription