• Sensor measuring range: −55 to + 127.0 °C
• Operation and monitoring free functioning
• Adjustable to heating or cooling
• Temperature adjustment in steps of 0.1 °C
• Remote measurement of up to 50 m
After the temperature switch has detected the current ambient temperature, it automatically switches the connected consumer on and off again as soon as the desired temperature is reached. For example, with a connected fan heater, the thermal switch can react as soon as the room temperature falls below 20°. It activates the fan heater and this heats until the set target temperature is reached. Afterwards the device switches itself off again automatically.
This practical function can be used wherever the room temperature needs to be kept under control. This includes a greenhouse in winter, a hobby room in the basement, a turtle terrarium, an electric outdoor sauna and many other possibilities. The switch can be used in many different ways and can also be used as a frost monitor, as a replacement for defective mechanical thermostats or digital thermometers.
Note: The connected device must not exceed 2300 VA.
Properties:
– Accuracy:
in the range −55 °C to −10 °C: ±2 °C
in the range −10 °C to +85 °C: ±0.5 °C
in the range + 85 °C to +127 °C: ±2 °C
– Unit ambient temperature: −10 to +40 °C
– Silicone cable Temperature range: −55 to +200 °C
– Display can be rotated by 180° using keys
– Temperature sensor type: Maxim DS 18B20 (with 2-m cable supplied)
– Min./ max. display
– Hysteresis (switching accuracy) freely adjustable (0.1 °C to 10 °C )
– Remote measurement up to 50 m
– Sensor monitoring for short circuit & interruption
– Output switches off in case of sensor error
– Operation and monitoring free functioning
– Adjustable to heating or cooling
– OLED display for temperature setting, relay (socket) on, sensor error, heating, cooling
– Storage of the programmed switching thresholds even in case of power failure
– Automatic restart after power failure
Abmessungen: | 60 x 40 x 98 mm |
---|---|
Farbe: | rot, weiß |
Kabellänge (m): | 2 Meter |
Leistungsaufnahme: | 0,3 VA (Stand-by) |
Material: | Kunststoff |
Max. Eingangsleistung (W): | 1840 Watt |
Max. temperature: | 127 °C |
Maximaler Betriebsstrom: | 10 Ampere |
Min. temperature: | -55 °C |
Netzspannung/Frequenz (V~Hz): | 220–240 V / 50 Hz |
Produktart: | Temperaturregler |
Schutzart (IP): | IP20 |
präzise Produktart: | Temperaturschalter |
Empfehlung: Schalter Temperatur
No longer available
• Operation and monitoring free functioning
• Adjustable to heating or cooling
• Temperature adjustment in steps of 0.1 °C
• Remote measurement of up to 50 m
Empfehlung: Wasserstand Schalter-Regler
Available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 10 m
Available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 10 m
Available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 10 m
Available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 2 m
No longer available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 2 m
Available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 2 m
Available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 5 m
Available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 5 m
Available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 5 m
No longer available
• Sensor cable 10 m
• 160 x 80 x 60 mm
• Cable length 2 m
No longer available
• Responsivity for reaction < 50 kOhm
• Sensor Cable 10 m
• Range of function: –15 °C / +40 °C
• LED display for: Level, mains, Rel. Ein
• Cable Length: 2 m
No longer available
• Responsivity for reaction < 50 kOhm
• Cable length 2 m / sensor 2x 10 m
• Range of function: –15 °C / +40 °C
• LED display for: sensor min/max., mains, default, relay (Rel. Ein)
No longer available
• Trigger sensitivity 10/200 kOhm
• Sensor cable 30 m
• Functional area –15 °C / +40 °C
• Cable length 2 m
No longer available
• Cable length 10 m
• For water level switch
No longer available
• Cable length 10 m
• Suitable for water level switch
• WPS 3000 & WPS 3000plus
No longer available
• Cable length 30 m
• Suitable for the water level switch
• WPS 5000
Available
• Useful dry-out protection for ponds
• Switches pump off with too low a water level
• Provides safety for unattended moments
• 5 m long cable
Available
• Useful overflow protection for ponds
• Switches pump off with too high a water level
• Provides safety for unattended moments
• 5 m long cable