• Switch capacity 3000 Watts max.
• Responsivity for reaction < 50 kOhm
• Cable length 2 m / sensor 2x 10 m
• Range of function: –15 °C / +40 °C
• LED display for: sensor min/max., mains, default, relay (Rel. Ein)
WPS 3000plus is well-suited for all reservoirs made of concrete, plastic, or metal.
Due to its pluggable connections, it is installed quickly and without any effort.
It operates absolutely free from any disturbance because there are no moveable floating switches.
• Selectable switching point with any water level via two water sensors
• For all reservoirs made of concrete, plastic or metal
• Switch outlet (Rel.) configurable as an opening or to close (filling / drainage) on the front via switches
• Remote measuring up to 20 m by two-core cable
• No dangerous mains voltage on the sensor
• Non-monitored operation
• Very simple and quick assembly, ready to plug
• Including 2 water sensors along with 10 m cable length each and RJ 45 plug
• LED display for mains, sensor min., sensor max., default and relay (Rel. Ein)
Eingangsleistung: | 1.5 Watt |
---|---|
Leistungsaufnahme: | 1,5 W |
Netzspannung/Frequenz (V~Hz): | 220–240 V / 50 Hz |
Schutzart (IP): | IP20 |
Ersatzteile
No longer available
• Cable length 10 m
• Suitable for water level switch
• WPS 3000 & WPS 3000plus
Empfehlung: Wasserstand Schalter-Regler
Available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 10 m
Available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 10 m
Available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 10 m
Available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 2 m
No longer available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 2 m
Available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 2 m
Available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 5 m
Available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 5 m
Available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 5 m
No longer available
• Sensor cable 10 m
• 160 x 80 x 60 mm
• Cable length 2 m
No longer available
• Responsivity for reaction < 50 kOhm
• Sensor Cable 10 m
• Range of function: –15 °C / +40 °C
• LED display for: Level, mains, Rel. Ein
• Cable Length: 2 m
No longer available
• Responsivity for reaction < 50 kOhm
• Cable length 2 m / sensor 2x 10 m
• Range of function: –15 °C / +40 °C
• LED display for: sensor min/max., mains, default, relay (Rel. Ein)
No longer available
• Trigger sensitivity 10/200 kOhm
• Sensor cable 30 m
• Functional area –15 °C / +40 °C
• Cable length 2 m
No longer available
• Cable length 10 m
• For water level switch
No longer available
• Cable length 10 m
• Suitable for water level switch
• WPS 3000 & WPS 3000plus
No longer available
• Cable length 30 m
• Suitable for the water level switch
• WPS 5000
Available
• Useful dry-out protection for ponds
• Switches pump off with too low a water level
• Provides safety for unattended moments
• 5 m long cable
Available
• Useful overflow protection for ponds
• Switches pump off with too high a water level
• Provides safety for unattended moments
• 5 m long cable
Empfehlung: Schalter Temperatur
No longer available
• Operation and monitoring free functioning
• Adjustable to heating or cooling
• Temperature adjustment in steps of 0.1 °C
• Remote measurement of up to 50 m