Quantity | Unit price |
---|---|
To 1 |
€18.49*
|
To 4 |
€17.18*
|
From 5 |
€16.27*
|
More than 30 available.
Immediately available, 2 - 3 days delivery time within Germany.
Delivery times for other countries see here.
• Float Switch 250V 50/60Hz max. 16A
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 10 m
The float switch is brought up to surface by the increasing liquid till at an angle of 50° from the horizontal a switching operation is triggered. The float switch can be dangled from above in the fluid by using a screw connection on the side or by open tanks.
By means of the standard loading weight the switching point can be optimally determined. The float switch is suitable for monitoring the fluid level for almost all fluids that do not corrode its material, independent of the degree of soiling.
You can use the float switch as full or low level indicator for controlling pumps and valves or for alarm indications. Suitable for almost all pumps.
In case your pump has a higher output than 1,1 you should install a standard main contactor or a corresponding power relay. With a 380V main-contactor the 380/400V three-phase-pumps are also controllable.
Abmessungen: | 80 x 159 x 43 mm |
---|---|
Farbe: | blau, gelb, schwarz |
Fördermedium: | Frisch- / Klar- / Brunnenwasser / Waschlauge |
Kabellänge (m): | 10 Meter |
Max. temperature: | 50 °C |
Netzspannung/Frequenz (V~Hz): | 220–240 V / 50 Hz |
Produktart: | Schwimmerschalter |
Schutzart (IP): | IP68 |
Empfehlung: Wasserstand Schalter-Regler
Available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 10 m
Available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 10 m
Available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 10 m
Available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 2 m
No longer available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 2 m
Available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 2 m
Available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 5 m
Available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 5 m
Available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 5 m
No longer available
• Sensor cable 10 m
• 160 x 80 x 60 mm
• Cable length 2 m
No longer available
• Responsivity for reaction < 50 kOhm
• Sensor Cable 10 m
• Range of function: –15 °C / +40 °C
• LED display for: Level, mains, Rel. Ein
• Cable Length: 2 m
No longer available
• Responsivity for reaction < 50 kOhm
• Cable length 2 m / sensor 2x 10 m
• Range of function: –15 °C / +40 °C
• LED display for: sensor min/max., mains, default, relay (Rel. Ein)
No longer available
• Trigger sensitivity 10/200 kOhm
• Sensor cable 30 m
• Functional area –15 °C / +40 °C
• Cable length 2 m
No longer available
• Cable length 10 m
• For water level switch
No longer available
• Cable length 10 m
• Suitable for water level switch
• WPS 3000 & WPS 3000plus
No longer available
• Cable length 30 m
• Suitable for the water level switch
• WPS 5000
Available
• Useful dry-out protection for ponds
• Switches pump off with too low a water level
• Provides safety for unattended moments
• 5 m long cable
Available
• Useful overflow protection for ponds
• Switches pump off with too high a water level
• Provides safety for unattended moments
• 5 m long cable
Empfehlung: Schalter Temperatur
No longer available
• Operation and monitoring free functioning
• Adjustable to heating or cooling
• Temperature adjustment in steps of 0.1 °C
• Remote measurement of up to 50 m