Item no.: 50919
GTIN/EAN: 4250390865499
€135.99
More than 30 available.
Immediately available, 2 - 3 days delivery time within Germany.
Delivery times for other countries see here.
• Delivery rate 19,200 l/h
• Power intake 750 W
• max. delivery height 16 m
• max. suction height 3.5 m
• max. grain size 2.5 mm
Product information "WilTec Circulation Pump 19200l/h 750W Swimming Pool Water Filter"
The 19200l/h can improve significantly the water quality and clear swimming pools and whirpools.
The pump has low consumption, high capacity and its operation is practically maintenance-free. The motor and pump shaft do not come into contact with the swimming pool water.
The pump can be positioned max. 3 m below the water level.
The swimming pool pump is the heart of a swimming pool system. It is mounted directly in front of the filter vessel. The pool pump draws the water from the skimmer to the pool and pushes the water through the filter medium.
The pump has low consumption, high capacity and its operation is practically maintenance-free. The motor and pump shaft do not come into contact with the swimming pool water.
The pump can be positioned max. 3 m below the water level.
The swimming pool pump is the heart of a swimming pool system. It is mounted directly in front of the filter vessel. The pool pump draws the water from the skimmer to the pool and pushes the water through the filter medium.
Safety Instructions
Safety Information
- Please read and follow the operating instructions and safety information prior to initial operation.
- The device is not intended for use by persons (including children) with reduced physical, sensory and mental abilities or lack of experience and/or knowledge, unless they are supervised or have been given instructions concerning the correct use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the device.
Risk of Eye and Skin Damage
- The UV-C radiation generated by the special lamps is dangerous. Direct contact with eyes or skin can cause damage. Never look into the UV-C light directly.
Risk of Electric Shock
- The power supply of the filter system (resp. the circuit of the socket used) must be equipped with a residual-current device (RCD) with a rated residual current of no more than 30 mA. The socket into which the power cable is plugged should be protected with a weatherproof cover and be at least 2 metres away from the garden pond.
- When people are in the pool, swimming pool pumps may only be operated at a distance of 2 metres and outside the pool.
- The device may not be operated in swimming pools, paddling pools of any kind or other bodies of water in which people may be present during operation. Do not use the appliance while people are in the danger zone.
- Make sure to switch off the device before carrying out any maintenance or repair work and disconnect it from the power supply by pulling out the plug.
- Before initial operation, ensure that the mains voltage matches the rated voltage on the rating plate.
- If the device is damaged, it must no longer be used.
Manufacturer
- WilTec Wildanger Technik GmbH
- Königsbenden 12
- 52249 Eschweiler
- DE
- service@wiltec.info
Properties "WilTec Circulation Pump 19200l/h 750W Swimming Pool Water Filter"
Ansaugtiefe: | 3.5 Meter |
---|---|
Cable length (m): | 1.5 Meter |
Colour: | black |
Dimensions: | 573 x 180 x 330 mm |
Druck: | max. 1.6 bar |
Fördermedium: | Wasser |
IP code: | IP54 |
Input power: | 750 Watt |
Leistungsaufnahme: | 750W / 1,0PS |
Mains voltage/frequency (V~/Hz): | 220–240 V / 50 Hz |
Max. flow rate: | 19200 Liter |
Max. grain size: | 2.5 Millimeter |
Max. pressure (bar): | 1.6 Bar |
Modell: | PP 19200/750 |
Product type: | swimming pool pump |
Sound level (dB (A)): | 70 db(A) |
max. Förderhöhe: | 16 m |