Item no.: 50969
GTIN/EAN: 4250390872107
€95.37
More than 30 available.
Immediately available, 2 - 3 days delivery time within Germany.
Delivery times for other countries see here.
• Delivery rate: 8000 l/h
• Power intake 100 W
• Maximum delivery head: 7.5 m
• Dirt particles up to 6 mm
• Dry and wet installation
Product information "SunSun Swimming Pool Circulation Pump 8000 l/h 100 W with Filter ECO CPP-12000F"
The frequency-controlled swimming pool pump with its synchronic motor SunSun CPP-12000F is characterized by its exceptionally high economy with up to 60 % in comparison to the “old-fashioned” asynchronic motors.
We compared 3 swimming pool pumps: we have tested SunSun CPP-8000 and SunSun CPP-8000F respectively against SunSun HZS-280.
• SunSun CPP-8000: power: 65 W, delivery head: 5.7 m, flow rate: 8000 l/h (with 1.2 m x ø32 mm hose)
• SunSun CPP-8000F: power: 62 W, delivery head: 6.0 m, flow rate: 5000 l/h (with 1.2 m x ø32 mm hose)
• SunSun HZS-280: power: 294 W, delivery head: 7.7 m, flow rate: 6800 l (with 1.2 m x ø32 mm hose)
The maximum capacity of circulation of 8000 l/h may contribute significantly to increase the quality of the water. Due to the ceramic shaft, the garden pump provides for a practically maintenance-free operation.
This CPP-series is well suited as a pump for aquariums, seawater pools, fountain ponds or protein skimmers. Or a a swimming pool pump. The pump does not have any components made of copper that get into contact with the water, to the effect that even the operation in seewater systems is possible without problems.
This SunSun CPP-series is the first SunSun pump for dry installation. Due to protection class IPX8 (unlimited period of protection against the ingress of water when completely immersed) it can also easily be used underwater.
We compared 3 swimming pool pumps: we have tested SunSun CPP-8000 and SunSun CPP-8000F respectively against SunSun HZS-280.
• SunSun CPP-8000: power: 65 W, delivery head: 5.7 m, flow rate: 8000 l/h (with 1.2 m x ø32 mm hose)
• SunSun CPP-8000F: power: 62 W, delivery head: 6.0 m, flow rate: 5000 l/h (with 1.2 m x ø32 mm hose)
• SunSun HZS-280: power: 294 W, delivery head: 7.7 m, flow rate: 6800 l (with 1.2 m x ø32 mm hose)
The maximum capacity of circulation of 8000 l/h may contribute significantly to increase the quality of the water. Due to the ceramic shaft, the garden pump provides for a practically maintenance-free operation.
This CPP-series is well suited as a pump for aquariums, seawater pools, fountain ponds or protein skimmers. Or a a swimming pool pump. The pump does not have any components made of copper that get into contact with the water, to the effect that even the operation in seewater systems is possible without problems.
This SunSun CPP-series is the first SunSun pump for dry installation. Due to protection class IPX8 (unlimited period of protection against the ingress of water when completely immersed) it can also easily be used underwater.
Downloads
Manual for SunSun Swimming Pool Circulation Pump 8000 l/h 100 W with Filter ECO CPP-12000F Safety Instructions
Safety Instructions:
Read and follow the operating instructions and safety information completely before commissioning.
Before each use, inspect the pump, power cord, and plug for damage. Do not use damaged equipment.
Use the pump only for its intended purpose of pumping and circulating water within the specified technical limits.
Connect the pump only to a power supply whose voltage and frequency correspond to the specifications on the rating plate.
The power supply must be protected by a residual current device (RCD) with a rated residual operating current of no more than 30 mA.
Do not operate the pump while persons are in the swimming pool or hazard area.
For dry installation, install the pump securely and stably in accordance with the operating instructions and protect it from impermissible moisture.
Keep inlet and outlet openings and connected pipes free from blockages. Observe the permissible particle size, delivery head, and other operating limits of the respective model.
Before installation, cleaning, maintenance, or servicing, switch off the pump and completely disconnect it from the power supply.
Never carry, lift, or pull the pump out of the water by the power cord. Protect the power cord from sharp edges, heat, crushing, and tensile stress.
Do not pump flammable, explosive, aggressive, or other liquids not intended for the pump.
Do not modify or alter the pump or its electrical components.
Operate the pump out of the reach of children and supervise children to ensure that they do not play with the appliance.
In the event of unusual noises, overheating, reduced performance, or other malfunctions, switch off the pump immediately, disconnect it from the power supply, and have it checked before using it again.
When storing or taking the pump out of service, remove residual water and protect the pump from frost and damage in accordance with the operating instructions.
Manufacturer
WilTec Wildanger Technik GmbH
- Wilhelm-Lexis-Str. 8
- 52249 Eschweiler
- DE
service@wiltec.info
Umwelt & Entsorgung
Elektro- und Elektronikgeräte dürfen nicht über den Hausmüll entsorgt werden. Weitere Informationen zur Rückgabe und Entsorgung von Altgeräten finden Sie in unseren .
Properties "SunSun Swimming Pool Circulation Pump 8000 l/h 100 W with Filter ECO CPP-12000F"
Properties
| Battery required: | No |
|---|---|
| Cable cross section (mm²): | 3 x 0,75 mm² |
| Cable length (m): | 5 Meter |
| Cable type: | H05RN-F |
| Colour: | black |
| Dimensions: | 420 x 152 x 248 mm |
| Flow rate (l/h): | 8000 Liter |
| IP code: | IPX8 |
| Input power: | 100 Watt |
| Main material: | ABS, PC |
| Mains voltage/frequency (V~/Hz): | 220–240 V / 50 Hz |
| Max. delivery head: | 7.5 Meter |
| Max. grain size: | 6 Millimeter |
| Product type: | swimming pool pump |
| Sound level (dB (A)): | 050 |





































































