Sand Filter System Pump Tank Above Ground Swimming Pool Spa Water Filtration

• 260 Watts self-priming pump
• 60 x 33 cm sand filter
• Up to 21.5 kg of sand
• Max. Temperature 40 °C
• Flow valve with 5 adjustment options
Product information "Sand Filter System Pump Tank Above Ground Swimming Pool Spa Water Filtration"
The combination of a pump and sand filter represents the optimal filter solution for all whirlpools and small above-ground pools. Thanks to modern pump and filter technology, this set achieves the best possible ratio of energy efficiency and water clarity due to its high filter performance.
The assembly is quick and easy by hand so that the filter system can be used immediately after delivery. The 5-position valve with various adjustment options allows maximum flow even at low pressure. It offers the following settings for the operation of the filter:
• Backwash: backwash function for rinsing out deposits in the sand layer of the filter
• Rinse: used after the backwash function to flush out all dirty water of the filter
• Filter: normal filter operation
• Winter: settings to overwinter the filter
• Drain: the swimming pool water is pumped out through the filter; this way you can drain your swimming pool
Working pressure: 1.5 bar
Grain size: Ø0.4 to 0.8 mm
Recommended pool size: max. 20 m³
So, if you want a complete all-in-one solution, this filter is the perfect choice.
Note:
The filter system is suitable for swimming pools equipped with chlorinator or with saltwater electrolysis for pools.
The assembly is quick and easy by hand so that the filter system can be used immediately after delivery. The 5-position valve with various adjustment options allows maximum flow even at low pressure. It offers the following settings for the operation of the filter:
• Backwash: backwash function for rinsing out deposits in the sand layer of the filter
• Rinse: used after the backwash function to flush out all dirty water of the filter
• Filter: normal filter operation
• Winter: settings to overwinter the filter
• Drain: the swimming pool water is pumped out through the filter; this way you can drain your swimming pool
Working pressure: 1.5 bar
Grain size: Ø0.4 to 0.8 mm
Recommended pool size: max. 20 m³
So, if you want a complete all-in-one solution, this filter is the perfect choice.
Note:
The filter system is suitable for swimming pools equipped with chlorinator or with saltwater electrolysis for pools.
Safety Instructions
Safety Information
Please read and follow the operating instructions and safety information prior to initial operation.
The device is not intended for use by persons (including children) with reduced physical, sensory and mental abilities or lack of experience and/or knowledge, unless they are supervised or have been given instructions concerning the correct use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the device.
The power supply of the filter system (resp. the circuit of the socket used) must be equipped with a residual-current device (RCD) with a rated residual current of no more than 30 mA. The socket into which the power cable is plugged should be protected with a weatherproof cover and be at least 2 metres away from the garden pond.
When people are in the pool, swimming pool pumps may only be operated at a distance of 2 metres and outside the pool.
The device may not be operated in swimming pools, paddling pools of any kind or other bodies of water in which people may be present during operation. Do not use the appliance while people are in the danger zone.
Make sure to switch off the device before carrying out any maintenance or repair work and disconnect it from the power supply by pulling out the plug.
Before initial operation, ensure that the mains voltage matches the rated voltage on the rating plate.
If the device is damaged, it must no longer be used.
The sand filter system is intended exclusively for water treatment in pools. Do not use it for any other types of liquids or chemical products.
To avoid damage, do not exceed the maximum operating pressure specified by the manufacturer.
Manufacturer
WilTec Wildanger Technik GmbH
- Wilhelm-Lexis-Str. 8
- 52249 Eschweiler
- DE
service@wiltec.info
Properties "Sand Filter System Pump Tank Above Ground Swimming Pool Spa Water Filtration"
| Battery required: | No |
|---|---|
| Capacity (l): | 20 Kubikmeter |
| Dimensions: | 415 x 330 x 600 mm |
| Druck: | max. Arbeitsdruck 1,5 bar |
| Flow rate (l/h): | 6000 LITER |
| Hose connection: | Einlass Ø 32.8 mm, Ø 32.89 mm |
| Input power: | 260 Watt |
| Main material: | plastic |
| Mains voltage/frequency (V~/Hz): | 220–240 V / 50 Hz |
| Max. suction height: | 4 Meter |
| Pressure gauge (yes / no): | Yes |
| Product type: | sand filter |
| Working pressure: | 1.5 Bar |




































































