Skip to main content Skip to search Skip to main navigation

SunSun Circulation Pump 7500l/h 380W Swimming Pool Water Filter

Product information "SunSun Circulation Pump 7500l/h 380W Swimming Pool Water Filter"

The electric centrifugal pump with injector system HZS-300 is characterised by an excellent filter and circulation system. The 7500 l/h maximum circulation capacity can make a significant contribution to increasing the water quality and cleaning swimming pools and whirlpools.

The pump is characterised by low consumption with high performance and practically maintenance-free operation. The motor and pump shaft do not come into contact with the pool water.

It is a block pump with an integrated fiber catcher that can be set up max. 2 m above or max. 3 m below the water level.

The swimming pool pump is the heart of a swimming pool system and is installed directly in front of the filter tank. The pool pump draws water from the skimmer of the pool and forces the water through the filter media.
Safety Instructions

Safety Information

  • Feature Please read and follow the operating instructions and safety information prior to initial operation.
  • Feature The device is not intended for use by persons (including children) with reduced physical, sensory and mental abilities or lack of experience and/or knowledge, unless they are supervised or have been given instructions concerning the correct use of the appliance by a person responsible for their safety.
  • Feature Children should be supervised to ensure that they do not play with the device.
    Risk of Eye and Skin Damage
  • Feature The UV-C radiation generated by the special lamps is dangerous. Direct contact with eyes or skin can cause damage. Never look into the UV-C light directly.
    Risk of Electric Shock
  • Feature The power supply of the filter system (resp. the circuit of the socket used) must be equipped with a residual-current device (RCD) with a rated residual current of no more than 30 mA. The socket into which the power cable is plugged should be protected with a weatherproof cover and be at least 2 metres away from the garden pond.
  • Feature When people are in the pool, swimming pool pumps may only be operated at a distance of 2 metres and outside the pool.
  • Feature The device may not be operated in swimming pools, paddling pools of any kind or other bodies of water in which people may be present during operation. Do not use the appliance while people are in the danger zone.
  • Feature Make sure to switch off the device before carrying out any maintenance or repair work and disconnect it from the power supply by pulling out the plug.
  • Feature Before initial operation, ensure that the mains voltage matches the rated voltage on the rating plate.
  • Feature If the device is damaged, it must no longer be used.
Manufacturer
  • manufacture location WilTec Wildanger Technik GmbH
  • Wilhelm-Lexis-Str. 8
  • 52249 Eschweiler
  • DE
  • email service@wiltec.info
Properties "SunSun Circulation Pump 7500l/h 380W Swimming Pool Water Filter"
Ansaugtiefe: 7 Meter
Battery required: No
Cable cross section (mm²): 3 x 0.75 mm²
Cable length (m): 1.5 Meter
Cable type: H05RN-F
Dimensions: 470 x 120 x 270 mm
Druck: max. 0.7 bar
Flow rate (l/h): 7500 Liter
Fördermedium: Frisch- / Klar- / Brunnenwasser
IP code: IP44
Input power: 380 Watt
Main material: ABS, PP
Mains voltage/frequency (V~/Hz): 220–240 V / 50 Hz
Max. delivery head: 7 Meter
Max. grain size: 3 Millimeter
Max. pressure (bar): 0.7 Bar
Product type: swimming pool pump