SunSun CPF-380 Pressure Pond Filter with UVC 11W Clarifier up to 12000l

Item no.: 51043
GTIN/EAN: 4250390874156
€120.99
More than 30 available.
Immediately available, 2 - 3 days delivery time within Germany.
Delivery times for other countries see here.
• SunSun Pressure Pond Filter for ponds up to 12,000 l
• Integrated UVC lamp 11 W
• Biological and mechanical cleaning
• maximum pump capacity 10,000 l/h
Product information "SunSun CPF-380 Pressure Pond Filter with UVC 11W Clarifier up to 12000l"
• Contamination indicator
• Large water flow through
• Optimal development of pond filter biology
• Easy and uncomplicated bio-pressure pond filter system
• This system provides quickly and reliably for clear water
• Various filter materials (special filter sponges)
Advantages:
Mechanically and biologically operating pressure pond filter SunSun CPF-380 with integrated 11 W UVC pond clarifier. Technical equipment as well as connections are in the top cover. The pond filter can be dug without any problems. The pond water can be pumped to higher-lying waterfalls and returned into the garden pond again.
Purification and maintenance:
The yearly maintenance is limited to the control of the filter media and the UVC-lamp. The UVC-lamp should be changed after every 6000–8000 operating hours. Said change is supposed to be most optimal with the start of the pond season in spring.
The cleaning of the filter sponges is possible by the means of manual backwash. You simply exchange the inlet and outlet. The water required for the backwash could be used to water the garden.
Location of the pressure pond filter:
The pressure pond filter is located at the edge of the pond and connected to the water by a suitable pond pump (not included in the supply, kindly note the maximum volume capacity of the pond pump). The water is passed through the pond filter past the integrated UV-pond clarifier and led back into the pond, now being purified.
Operation:
By the way of mechanical filtration, floating particles and dirt remain in the filter and do not return into the pond water.
Pond filters combine the mechanical and biological purification. Microorganisms accumulate inside the filter materials and remove germs and bacteria from the water. Floating particles and dirt are removed.
It takes about 4–6 weeks for the filter bacteria to settle sufficiently inside the pond filter. Only then it is reasonable to make use of a UVC-pond clarifier. The so-called initial starter bacteria help to reduce the time for a new pond filter. The “starter bacteria” are known as special microorganisms that are grown in laboratories. Being active at a temperature of approx. 10–12 °C, the temperature of the pond filter should not exceed 40 °C. It is therefore advisable to place the pond filter in a shady place. It should not be exposed to direct sunlight.
UVC-pond clarifiers significantly support the effectiveness of the pond filter. Being in a flow reactor, pond clarifiers radiate the pond water with UV-C radiation. Due to their UV-radiation, UVC pond clarifiers change the tertiary and quaternary structure of algae proteins. This means the destruction of algae. The algae clump together, thus forming large particles that can be easily removed from the water cycle by the mechanical pond filtration inside the pond filter.
• Large water flow through
• Optimal development of pond filter biology
• Easy and uncomplicated bio-pressure pond filter system
• This system provides quickly and reliably for clear water
• Various filter materials (special filter sponges)
Advantages:
Mechanically and biologically operating pressure pond filter SunSun CPF-380 with integrated 11 W UVC pond clarifier. Technical equipment as well as connections are in the top cover. The pond filter can be dug without any problems. The pond water can be pumped to higher-lying waterfalls and returned into the garden pond again.
Purification and maintenance:
The yearly maintenance is limited to the control of the filter media and the UVC-lamp. The UVC-lamp should be changed after every 6000–8000 operating hours. Said change is supposed to be most optimal with the start of the pond season in spring.
The cleaning of the filter sponges is possible by the means of manual backwash. You simply exchange the inlet and outlet. The water required for the backwash could be used to water the garden.
Location of the pressure pond filter:
The pressure pond filter is located at the edge of the pond and connected to the water by a suitable pond pump (not included in the supply, kindly note the maximum volume capacity of the pond pump). The water is passed through the pond filter past the integrated UV-pond clarifier and led back into the pond, now being purified.
Operation:
By the way of mechanical filtration, floating particles and dirt remain in the filter and do not return into the pond water.
Pond filters combine the mechanical and biological purification. Microorganisms accumulate inside the filter materials and remove germs and bacteria from the water. Floating particles and dirt are removed.
It takes about 4–6 weeks for the filter bacteria to settle sufficiently inside the pond filter. Only then it is reasonable to make use of a UVC-pond clarifier. The so-called initial starter bacteria help to reduce the time for a new pond filter. The “starter bacteria” are known as special microorganisms that are grown in laboratories. Being active at a temperature of approx. 10–12 °C, the temperature of the pond filter should not exceed 40 °C. It is therefore advisable to place the pond filter in a shady place. It should not be exposed to direct sunlight.
UVC-pond clarifiers significantly support the effectiveness of the pond filter. Being in a flow reactor, pond clarifiers radiate the pond water with UV-C radiation. Due to their UV-radiation, UVC pond clarifiers change the tertiary and quaternary structure of algae proteins. This means the destruction of algae. The algae clump together, thus forming large particles that can be easily removed from the water cycle by the mechanical pond filtration inside the pond filter.
Safety Instructions
Safety Information
Please read and follow the operating instructions and safety information prior to initial operation.
The device is not intended for use by persons (including children) with reduced physical, sensory and mental abilities or lack of experience and/or knowledge, unless they are supervised or have been given instructions concerning the correct use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the device.
Risk of Eye and Skin Damage
The UV-C radiation generated by the special lamps is dangerous. Direct contact with eyes or skin can cause damage. Never look into the UV-C light directly.
Risk of Electric Shock
The power supply of the filter system (resp. the circuit of the socket used) must be equipped with a residual-current device (RCD) with a rated residual current of no more than 30 mA. The socket into which the power cable is plugged should be protected with a weatherproof cover and be at least 2 metres away from the garden pond.
The device may not be operated in swimming pools, paddling pools of any kind or other bodies of water in which people may be present during operation. Do not use the appliance while people are in the danger zone.
Make sure to switch off the device before carrying out any maintenance or repair work and disconnect it from the power supply by pulling out the plug.
Before initial operation, ensure that the mains voltage matches the rated voltage on the rating plate.
If the device is damaged, it must no longer be used.
Manufacturer
WilTec Wildanger Technik GmbH
- Wilhelm-Lexis-Str. 8
- 52249 Eschweiler
- DE
service@wiltec.info
Properties "SunSun CPF-380 Pressure Pond Filter with UVC 11W Clarifier up to 12000l"
| Battery required: | No |
|---|---|
| Cable cross section (mm²): | 3 x 0,75 mm² |
| Cable length (m): | 5 Meter |
| Cable type: | H05RN-F |
| Colour: | black |
| Dimensions: | 380 x 380 x 525 mm |
| Flow rate (l/h): | 10000 LITER |
| IP code: | IP44 |
| Input power: | 15 Watt |
| Main material: | ABS, PP, PC |
| Mains voltage/frequency (V~/Hz): | 220–240 V / 50 Hz |
| Max. pressure (bar): | 0.3 Bar |
| Max. temperature: | 35 °C |
| Min. temperature: | 4 °C |
| Pond size with fish: | 6000 Liter |
| Pond size without fish: | 12000 Liter |
| Product type: | pressurised pond filter |
| Tank volume (l): | 25 Liter |
| UVC power: | 11 Watt |
| Volumen: | 25 l |
| empfohlene Durchflussmenge: | 10.000 l/h |





































