Belopp | Pris per enhet |
---|---|
Till 1 |
30,49 €*
|
Från 2 |
28,57 €*
|
Mer än 30 levererbara.
Tillgänglig, leveranstid 2 - 3 dagar inom Tyskland.
Leveranstiderna för andra länder hittar du här.
Artikel nr.:
51248
Bruttovikt:
1.56 kg
• Single phase / 220–240 V / 10 A
• Starting pressure 1.5 bar
• Operating pressure max. 10 bar
• For domestic water pumps, pumps, compressors
Produktinformation "Pressure switch for domestic pumps fountain pumps SKD 3 230V single phase cable included"
The pressure switch automatically starts and stops the water pump by the opening and closing of the valve. As a result, there is a constant pressure in the water pump. If there is no water, the dry running protection is activated, and the pump stops working.
The pressure switch reduces the effects of water hammer.
The pump controller consists of hydraulic and electronic parts:
The hydraulic part:
• Stop valve
• Valve sensitive to flow change
• Form-pressed and enhanced plastic body
• Membrane and spring sensitive to pressure change
• Check valve that prevents water leaks when the membrane is damaged
The electronic part:
• a robust casing from self-extinguishing and form-pressed plastic
• a single tested and controlled electronic card with insulated conducting path.
• a relay with a switching capacity of approx. 100.000 cycles during continuous operation with a maximum charge of 1.1 kW.
• a varistor (additional protective element) against voltage spikes and surges.
The pressure switch goes together with 2 cables (protective contact coupling/plug), each 1.35 m long.
The pressure switch reduces the effects of water hammer.
The pump controller consists of hydraulic and electronic parts:
The hydraulic part:
• Stop valve
• Valve sensitive to flow change
• Form-pressed and enhanced plastic body
• Membrane and spring sensitive to pressure change
• Check valve that prevents water leaks when the membrane is damaged
The electronic part:
• a robust casing from self-extinguishing and form-pressed plastic
• a single tested and controlled electronic card with insulated conducting path.
• a relay with a switching capacity of approx. 100.000 cycles during continuous operation with a maximum charge of 1.1 kW.
• a varistor (additional protective element) against voltage spikes and surges.
The pressure switch goes together with 2 cables (protective contact coupling/plug), each 1.35 m long.
Egenskaper "Pressure switch for domestic pumps fountain pumps SKD 3 230V single phase cable included"
Abmessungen: | 120 x 135 x 240 mm |
---|---|
Anschlussgewinde: | 32.89 Millimeter |
Anschlüsse: | 32,89–33,25 mm (1 Zoll) AG |
Betriebsdruck: | 1.5 Bar |
Druck: |
max. Betriebsdruck 10 bar Startdruck 1,5 bar |
Druckschalter / Pumpensteuerung: |
Für Pumpen bis 1,1 KW Nennleistung Manometer 1 - 10 bar / 1-145 psi Stromstärke max. 10 A |
Farbe: | blau, schwarz |
Innengewinde: | 32,89 mm (1") |
Kabellänge (m): | 1.35 Meter |
Kabelquerschnitt (mm²): | 3 x 1,0 mm² |
Kabeltyp: | H07RN-F3G |
Max. temperatur: | 60 °C |
Max Nennstrom: | 10 A |
Min. temperatur: | 0 °C |
Netzspannung/Frequenz (V~Hz): | 220–240 V / 50 Hz |
Produktart: | Druckschalter |
Schutzart (IP): | IP65 |
Selbstaktivierungszeit (s/4m): | 0 |
max. Druck (bar): | 10 Bar |