Skip to main content Skip to search Skip to main navigation

SunSun NEO-5000 SuperEco Fish Pond Pump submersible Pumps 5000l/h 30W

Product information "SunSun NEO-5000 SuperEco Fish Pond Pump submersible Pumps 5000l/h 30W"

The SunSun NEO-5800 pond pump with a capacity of 5,200 l/h and 30 W is one of the pumps with the highest efficiency on the pond market.

Comparing the power consumption of the NEO pump series with other pond pumps, you will see that this series has been developed in line with the growing interest in energy saving.
Since pond and aquarium pumps are constantly in operation, they usually require a considerable amount of energy. This is why every saving in its consumption can help lowering your bills.

Calculation example:
Saving 5 watts means saving 43.8 kWh per year. Based on your electricity price, you can calculate the impact.

In addition to its use as a pond or stream pump, the SunSun pump of the NEO-Series can be employed to operate a skimmer on the suction side.
The delivery of the pond pump includes the second  hose connector as well as a cap for the outlet. If you do not use the external skimmer connection, you can close it with a blind plug.

Skimmer connection / stream pump / fountain pump / filter pump:
Please note: The additional suction connection can't be used at the same time as the suction through the filter housing.
To prevent the pond filter from overflowing when used with this powerful pond pump, we recommend the use of a Y-adapter. When this is used as a by-pass, a stream can be additionally supplied or the power can be distributed to another UVC pond clarifier or pond filter.

It is essential to match the delivery rate of the pond pump to the size of the pond filter. A pond pump with too high a flow rate will cause the pond filter to overflow. This must be avoided by all means. In addition, it is necessary to consider the circulation cycle of the pond and the retention time of the pond water in the pond filter.

The ideal circulation cycle depends on the following factors: fish population, aquatic plants, solar radiation and the desired water clarity. Of course, other components of the filter circuit might also have to be adapted to each other.

The following reference values apply:

Koi pond / Fish pond:
• 1 cycle per 3 hours
• 2 circulations in 1 hour (without plantings and with large fish population)

Garden pond / Plant pond:
A pond without fish population requires less circulation. In this case, one cycle can be taken as reference value in order to enrich the pond water with oxygen and to keep the water moving.

Swimming pond:
The circulation cycle for this type of pond strongly depends on the planting and the personal preferences.
A maximum of one circulation every 2-3 hours and a minimum of "no circulation" is given as a guideline.

Cleaning:
To ensure proper operation of the pond pump, it is necessary that you perform regular cleaning.
The handle attached to the housing makes it easy to remove the pump from the pond. The special design of the housing – no screws – allows opening it without any tools.

The pumps of the NEO series are equipped with a synchronous motor and are supplied with a 10 m cable.
Safety Instructions

Safety Information

  • Feature Please read and follow the operating instructions and safety information prior to initial operation.
  • Feature The device is not intended for use by persons (including children) with reduced physical, sensory and mental abilities or lack of experience and/or knowledge, unless they are supervised or have been given instructions on how to use the appliance by the person responsible for their safety.
  • Feature Children should be supervised to ensure that they do not play with the device.
    Risk of Electric Shock
  • Feature Never lift, transport or attach the appliance by the power cable.
  • Feature Before initial operation, ensure that the mains voltage matches the rated voltage on the rating plate.
  • Feature If the cable or the plug is damaged due to external influences, the cable must not be repaired. It has to be replaced with a new one.
  • Feature Ensure that the electrical connections are located in a flood-proof area resp. are protected against moisture.
  • Feature The device may not be operated in swimming pools, paddling pools of any kind or other bodies of water in which people may be present during operation. Do not use the appliance while people are in the danger zone.
  • Feature The power supply of the filter system (resp. the circuit of the socket used) must be equipped with a residual-current device (RCD) with a rated residual current of no more than 30 mA. The socket into which the power cable is plugged should be protected with a weatherproof cover and be at least 2 metres away from the garden pond.
Manufacturer
  • manufacture location WilTec Wildanger Technik GmbH
  • Wilhelm-Lexis-Str. 8
  • 52249 Eschweiler
  • DE
  • email service@wiltec.info
Properties "SunSun NEO-5000 SuperEco Fish Pond Pump submersible Pumps 5000l/h 30W"
Battery required: No
Cable cross section (mm²): 3 x 0.75 mm²
Cable length (m): 10 Meter
Cable type: H05RN-F
Dimensions: 240 x 178 x 124 mm
Flow rate (l/h): 5000 Liter
IP code: IPX8
Input power: 30 Watt
Main material: ABS, PC
Mains voltage/frequency (V~/Hz): 220–240 V / 50 Hz
Max. delivery head: 3.3 Meter
Max. grain size: 6 Millimeter
Max. temperature: 35 °C
Product type: pond pump
Protection class (0, I, II, III): I
Pump equipment: synchronous motor